Call Forwarding Off Premises

Cancel Soft Key Inoperative

[3.00.32] When programming Off Premise Call Forwarding from Menu + 60 in versions prior to 3.00.32, the Cancel soft key did not work. This is corrected.

Reference: A090424015

Clear Key Anomaly

[3.00.32] At a display keyset in versions prior to 3.00.32, the following would occur:

Push Menu + Dial 60.
Push Select + Edit + Next until you see Off Premise Speed Dial.
Push Select + CLEAR.
The display mistakenly shows Bin#?.

This issue is corrected in version 3.00.32.

Reference: A090424013

Incorrect Entry (Bin) If Speed Dial Not Programmed

[3.00.32] If there are no Speed Dial numbers programmed, and the user tries to program Off Premise Speed Dial, no entry (bin) will be displayed and the user cannot activate the feature. In software versions prior to 3.00.32, 256 would display and an entry could be selected (even though none were programmed).

This issue is corrected in version 3.00.32.

Reference: A090424012

Stuck Cursor

[3.00.32] When programming Off Premise Call Forwarding at a Super Display keyset in versions prior to 3.00.32, the flashing cursor could remain on the display after pressing Back. This is corrected.

Reference: A090424014

View Soft Key Issues

[3.00.32] Software version 3.00.32 corrects a problem on a Super Display keyset in which viewing the number stored for Off Premise Call Forwarding could require multiple presses of the View Number or View Name soft keys.