Room Monitor

Beep Tone Disabled When Setting Up Room Monitor

[3.01] If a user enables Room Monitor, the extension will silently go into the Room Monitor mode. In prior versions, a confirmation beep was heard. In this new software, the confirmation beep is heard only if the user presses DND and then lets the phone time out.

Reference: None

Continuous Room Monitor Over IP

[3.00.32] Continuous Room Monitor over IP is available in software version 3.00.32. In prior versions, the IP call would disconnect after 24 hours.

Reference: None

Headset And Room Monitor

[3.02] The following issues are corrected when using Headset Mode with Room Monitor:

When an extension has Headset mode enabled and is being monitored, placing an Intercom or outside call activates Handsfree rather than the headset.
When an extension has headset mode enabled and is monitoring another extension, placing an Intercom or outside call correctly activates the Headset mode but the SPEAKER key does not light.

Reference: A090715001

Monitoring Extension Hears Monitored Extension's Call

[3.02] In version 3 software prior to 3.02, the monitoring extension could hear the monitored extension's call as follows:

Extension 303 (for example) placed in Room Monitor mode.
Extension 301 (for example) calls and monitors 303.
Extension 303 places a call (outside or Intercom).
Extension 301 can hear the transmit audio from 303.

This is corrected in system software version 3.02.

Reference: A090723005

Room Monitor Using IP Keyset Problems

[3.01] This software version allows an IP keyset to use Room Monitor. This capability was not completely functioning in prior versions.

Reference: A090709003 A090709002

Transmit Lost While Multiple Extensions Monitor

[3.01] A problem is corrected when multiple extensions are monitoring the same extension. In previous versions, when the extension that last joined the Monitor press Talk the transmit path at the extension that first joined the Monitor is lost.

Reference: A090715003