[1.0.5.0] IP Telephone Firmware 1.0.5.0 provides the
following enhancements in the Admin Menu:
2:SIP Settings: 1:SIP User:
4:Backup Logon is removed since it is not used.
2:SIP Settings: 2:SIP Server:
1:Server Address provides entry for a single SIP Server
(i.e., system IP address). There were two SIP Server entries in prior versions, but only
the first entry was used.
2:SIP Settings: 2:SIP Server:
2:Server Port provides entry for a single SIP Server Port
(i.e., 5060 by default). There were two SIP Port entries in prior versions, but only the
first entry was used.
2:SIP Settings: 3:SIP Local Port provides
the IP telephone's SIP port (i.e., 5060 by default). You can change this option if
required.
2:SIP Settings: 4:RTP Local Port provides
the IP telephone's RTP port (i.e., 3462 by default). You can change this option if
required.
The method for setting a new password for the IP telephone is changed in
4:Security: 2:Admin Password. You will
now make three entries: Old Pswd (the old password),
New Pswd (the new password), and
Re-Enter (reenter the new password for confirmation).
Reference: None
Browser Interface Not Functioning
[1.0.5.0] In firmware version 1.0.3.0, the browser
interface for setting the IP telephone options was not available. This is corrected in version
1.0.5.0.
Reference: A090601001
CHECK Menu Enhancements
[1.0.5.0] IP Telephone Firmware 1.0.5.0 provides the
following enhancements in the CHECK Menu:
2.System Information: 2: SIP Settings:
shows a single connected SIP server. In prior releases, the 2nd SIP
Server option had no meaning.
2.System Information: 2: SIP Settings:
shows a single connected SIP server port. In prior releases, the 2nd SIP
Server option had no meaning.