IntraMail Night Answer with Day Key Ring

Setting up IntraMail Night Answer

Night Answer with Day Key Ring
Application Summary In this application, the site wants the IntraMail Automated Attendant to answer calls at night only. In the day, the outside lines will Key Ring. To do this: At night, directly terminate lines to the voice mail master number. At night, leave the lines at their default (Key Ring) assignment. Set up a Feature Key at extension 300 to control the day/night mode of the outside lines.
1	Set up the outside lines as DILs to the voice mail master number during the night mode. In 3112-04: Direct Termination at Night [Lines: Config: Options: Termination (3112): Night Termination: Direct Termination], enter 700 for each line.
2	Have the outside lines Key Ring during the day mode. In 3112-01: Direct Termination in the Day [Lines: Config: Options: Termination (3112): Day Termination: Direct Termination], set each line for Key Ring (by pressing `CLEAR`).
3	Enable extension 300 to put the system in the night mode. In 2102-01: Class of Service [Stations: Config: Setup: Access (2102): Class of Service], check the extension’s Class of Service level. In 1402-05: Activate Night Mode [System: Class of Service: Stations: Stations (1402): Activate Night Mode], enter Yes. This capability is normally reserved only for attendants.
4	Put a System Night Key on extension 300. Extension 300 can press this key to put the system in the night mode. This sends the day mode Key Ring lines to their night termination. To set up a System night key on an extension: In 2121-[01 to 24]: Feature Key Codes Stations: Config: Feature Keys: Assignment (2121): Function Type], enter 18. In 2121-[01 to 24]: Feature Key Data Stations: Config: Feature Keys: Assignment (2121): Function Type], press `CLEAR`. To put the day mode Key Ring lines into the night mode, the user presses their System night key.